| PART |
Description |
Maker |
| SD-44067-001 44067-1803 0440671803 |
3.00mm (.118) Pitch Micro-Fit 3.0 Wire-to-Board Header
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Wire-to-Board Header
3.00mm (.118") Pitch Micro-Fit 3.0垄芒 Wire-to-Board Header
|
Molex Electronics Ltd.
|
| 0436501003 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Right Angle, with Press-fit
|
Molex Electronics Ltd.
|
| 0447641002 |
3.00mm (.118") Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 0436500521 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| 0436500523 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| 44769-0603 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 44769-0403 SD-44769-001 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 0436500504 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Right Angle, with Press-fit Metal
|
Molex Electronics Ltd.
|
| 44769-1602 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 44769-0602 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 0430451617 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Vertical, with Press-fit Metal Retention Clip, 16 Circuits
|
Molex Electronics Ltd.
|
|
